Pre-Test Chamber
An economical solution for development.
SAC-3 · 3 m EMC Test Chamber
Compact semi-anechoic chamber with a 3 m test distance for emission and immunity testing of desktop and small electronic products.
- 3 m test distance, compact layout
- Site validation to CISPR 16
- Ideal for pre-testing and certification preparation
- 3 mTest distance
- CompactSmall footprint
- CISPR 16Site validation
What is a SAC-3 · 3 m EMC chamber?
Full-Scope Testing in a Small Footprint
A SAC-3 is a semi-anechoic chamber with 3 m between the product and the antenna. It is the most economical solution for testing desktop devices, circuit boards and small products.
With this chamber, manufacturers measure frequently during design, find problems early and arrive at the certification lab ready.
Compact Chamber
Fits in a standard laboratory.
Fast Testing
The product development cycle shortens.
CE Preparation
Full check before certification.
Validated Site
The room is tested to the standard.
Options
Let Us Help You Choose Three Options for Your Needs
Full SAC-3
Chamber suited to certification preparation.
SAC-3 + Conducted
Together with a conducted test room.
Technical specifications
Typical Technical Values
Values are defined per project. We give the exact figures in writing in the quote after the site survey.
Industries where it is used
| Test distance | 3 m |
|---|---|
| Frequency range | 30 MHz – 6 GHz, optional 18 GHz |
| Site validation | CISPR 16-1-4 |
| Equipment | Turntable, antenna mast |
| Standards | CISPR 32, EN 55032, IEC 61000-4-3 |
Process
From First Meeting to Handover
- 1
Free Site Survey
We listen to your needs, inspect the site and measure the signals.
- 2
Design and Quote
We define the size and equipment and give you a firm quote.
- 3
Manufacturing and Installation
We manufacture the parts, build the room and connect the services.
- 4
Testing and Handover
We test the room to the standard and deliver it with a report.
Frequently asked questions
Frequently Asked Questions About SAC-3 · 3 m EMC Chambers
If your question isn't answered here, ask our engineer directly.
Which products is a SAC-3 sufficient for?
It is sufficient for most desktop devices, adapters, circuit boards and small products.
How much space is needed?
The space needed for the chamber and control area is determined during the survey based on the absorber selection.
Can it be enlarged later?
Thanks to the modular construction, future expansion can be planned.
Is a control room needed?
A separate shielded control room is recommended so that measuring instruments don't emit interference.
SAC-3 · 3 m EMC chamber
Free Site Survey for Your SAC-3 · 3 m EMC Chamber
Tell us briefly what you need; your site survey and quote will be ready within 24 hours.
Related Solutions
SAC-5 · 5 m EMC Chamber
Flexible EMC chamber for mid-size products.
Semi-Anechoic Chamber
For CE and certification testing.
Shielding Effectiveness Testing
We measure performance and report it.