Acceptance Testing
Handover testing of a new room.
Shielding Effectiveness Testing
We measure and report how well your shielded room blocks signals using EN 50147-1, IEEE 299 or MIL-STD-285 methods.
- Point-by-point measurement at doors, filters and penetrations
- Signed report following the standard method
- Recommended fixes for problem points
- EN 50147-1Test method
- ReportedSigned result
- DiagnosisWeak point detection
What is shielding testing?
Does Your Room Really Work?
A shielded room's performance can only be known by measuring it. Worn gaskets, cables added later or faulty installation lower performance without anyone noticing.
We measure at different frequencies with antennas placed inside and outside the room, check critical points such as the door and penetrations one by one, and deliver the result in a signed report.
Standard Method
Measured with an international method.
Weak Point
The leak is located.
Signed Report
A document for audits and tenders.
Recommended Fix
The fix is planned.
Options
Let Us Help You Choose Three Options for Your Needs
Periodic Testing
Annual performance check and reporting.
Fault Finding
Locating the leak point.
Technical specifications
Typical Technical Values
Values are defined per project. We give the exact figures in writing in the quote after the site survey.
Industries where it is used
| Methods | EN 50147-1, IEEE 299, MIL-STD-285 |
|---|---|
| Frequency range | From magnetic fields up to GHz |
| Measurement points | Door, filters, penetrations, joints |
| Output | Signed test report |
| Room types | All brands and types |
Process
From First Meeting to Handover
- 1
Free Site Survey
We listen to your needs, inspect the site and measure the signals.
- 2
Design and Quote
We define the size and equipment and give you a firm quote.
- 3
Manufacturing and Installation
We manufacture the parts, build the room and connect the services.
- 4
Testing and Handover
We test the room to the standard and deliver it with a report.
Frequently asked questions
Frequently Asked Questions About Shielding Testing
If your question isn't answered here, ask our engineer directly.
Which method should be used?
The method specified in the contract or specification is used. If none is specified, EN 50147-1 or IEEE 299 is recommended.
Can you test a room built by another company?
Yes. We test and report regardless of brand or type.
How long does testing take?
Depending on room size and the number of measurement points, it is usually completed within one working day.
What happens if the result is poor?
We report the leak point and offer a solution and quote for repair or renewal.
Shielding testing
Free Site Survey for Shielding Testing
Tell us briefly what you need; your site survey and quote will be ready within 24 hours.
Related Solutions
Maintenance and Modification
Keep your room performing as on day one.
Faraday Cage
Shielded cage for R&D and testing.
RF / EMI Shielded Room
Interference-free room for sensitive measurements.