MIL-STD-461 Chamber
Shielded, absorber-lined chamber for emission and immunity testing of military equipment.
Test and Measurement Chambers for Aerospace
We build chambers that prepare aircraft, UAV and satellite electronics for DO-160 and MIL-STD-461 tests and measure antenna performance.
- Chamber suited to DO-160 and MIL-STD-461 test setups
- Measurement chamber for antenna and communication systems
- From design to installation, delivered measured
- RTCA DO-160Aircraft electronics
- Antenna MeasurementAnechoic chamber
- Satellite and UAVSystem testing
Why is it needed?
There's No Second Chance in the Air.
A device on an aircraft disturbing another system or being affected by outside signals is unacceptable. That's why avionics go through the strictest electromagnetic tests in certification.
In UAV and satellite projects, antenna performance determines success. Antenna measurements are made in anechoic chambers where reflections are fully absorbed.
We design test chambers and antenna measurement chambers around your product and test plan, and deliver them measured after installation.
Avionics Testing
Flight and communication equipment.
Satellite and Space
Satellite systems and antenna testing.
Antenna Measurement
Antenna gain and pattern measurement.
UAV Systems
Data link and control testing.
Solutions
Rooms Used in Aerospace
Antenna Measurement Chamber
Antenna performance measurement chamber with absorbers on every surface.
Standards
Which Standards Do We Build To?
The room is designed to the standard your product or facility must meet and is tested against that standard at handover.
- Your testing and usage needs are defined during the site survey
- A test report is provided at handover
- Annual maintenance and re-testing are available
- RTCA DO-160
Defines environmental and electromagnetic tests for equipment used on aircraft.
- MIL-STD-461G
The US Department of Defense standard for electromagnetic emission and immunity testing of military equipment.
Process
From First Meeting to Handover
- 1
Free Site Survey
We listen to your needs, inspect the site and measure the signals in the environment.
- 2
Design and Quote
We define the room size and equipment and give you a firm quote and schedule.
- 3
Manufacturing and Installation
We manufacture the panels, build the room and connect power and ventilation.
- 4
Testing and Handover
We test the room to the standard and deliver it with a report.
Frequently asked questions
Frequently Asked Questions About Aerospace
If your question isn't answered here, ask our engineer directly.
Are separate chambers needed for DO-160 and MIL-STD-461?
Often the same chamber can be designed for both standards. The decision depends on the size of the devices to be tested and the frequency range.
What is the difference between an antenna measurement chamber and an EMC test chamber?
An EMC chamber tests whether a device emits interference and how immune it is. In an antenna measurement chamber all surfaces are covered with absorbers and reflections are reduced to almost nothing.
What frequency range can it work in?
Absorber material and chamber size are chosen according to the lowest and highest frequency you want to measure. We review your test plan together during the survey.
Can the chamber be enlarged?
Thanks to the modular construction, size and equipment can be increased later.
Aerospace
Free Site Survey for Your Aerospace Project
Tell us briefly what you need; your site survey and quote will be ready within 24 hours.