Compact 461 Chamber
Compact, for component testing.
MIL-STD-461 Military Test Chamber
We build heavy-load, standard-compliant test chambers for MIL-STD-461 and RTCA DO-160 testing of military and aerospace equipment.
- Chamber suited to the MIL-STD-461G test setup
- Shared use with RTCA DO-160
- Heavy-duty floor and wide door options
- 461GMilitary standard
- DO-160Aerospace
- Heavy loadStrong floor
What is a MIL-STD-461 military chamber?
A Defense Project's Schedule Depends on the Test Chamber
Before going into the field, military equipment passes MIL-STD-461 tests for the interference it emits and its immunity to outside signals. RTCA DO-160 is used for aerospace equipment.
With your own test chamber you run pre-tests during development and arrive at qualification testing ready. The chamber can be designed to meet both standards.
Standard Setup
461G table and antenna layout.
Shared Use
DO-160 tests can be run as well.
Heavy Load
Large systems can be tested.
Schedule Control
Testing doesn't delay the project.
Options
Let Us Help You Choose Three Options for Your Needs
Standard 461 Chamber
Large table for subsystems.
Platform Chamber
For vehicles and platforms.
Technical specifications
Typical Technical Values
Values are defined per project. We give the exact figures in writing in the quote after the site survey.
Industries where it is used
| Standards | MIL-STD-461G, RTCA DO-160 |
|---|---|
| Frequency range | 10 kHz – 18 GHz, optional 40 GHz |
| Absorbers | Ferrite and pyramid, standard-compliant |
| Floor | Heavy load, reinforced |
| Shielding | 100 dB and above |
Process
From First Meeting to Handover
- 1
Free Site Survey
We listen to your needs, inspect the site and measure the signals.
- 2
Design and Quote
We define the size and equipment and give you a firm quote.
- 3
Manufacturing and Installation
We manufacture the parts, build the room and connect the services.
- 4
Testing and Handover
We test the room to the standard and deliver it with a report.
Frequently asked questions
Frequently Asked Questions About MIL-STD-461 Chambers
If your question isn't answered here, ask our engineer directly.
How is the chamber size determined?
It is calculated from the largest device to be tested, antenna distances and table layout.
Is a separate chamber needed for DO-160?
In most cases the same chamber can be designed to meet both standards.
Which absorber is used?
Ferrite and pyramid absorbers that sufficiently reduce reflections at the frequencies the standard requires are selected.
What documents are provided at handover?
A test report, material certificates, drawings and maintenance instructions are delivered.
MIL-STD-461 military chamber
Free Site Survey for Your MIL-STD-461 Chamber
Tell us briefly what you need; your site survey and quote will be ready within 24 hours.
Related Solutions
SAC-10 · 10 m EMC Chamber
Large equipment and full-compliance testing.
TEMPEST Room
Room that prevents information leakage.
EMP / HEMP Protected Room
Protects critical systems against pulses.