Antenna Measurement Chamber
Antenna performance measurement chamber with absorbers on every surface.
Antenna Measurement Chambers for Telecom and 5G
Measure the performance of antennas, phones and wireless devices without reflections, with repeatable results.
- Anechoic chamber for antenna and wireless device measurement
- Absorber selection suited to 5G and high-frequency testing
- Designed around your test equipment, delivered measured
- Anechoic EnvironmentReflection-free measurement
- 5G ReadyHigh frequency
- Antenna TestingGain and pattern
Why is it needed?
Accurate Measurement Happens Without Reflections.
When measuring the wireless performance of an antenna or phone, signals reflected from the walls spoil the result. Outside base station and Wi-Fi signals also mix into the measurement.
An anechoic chamber solves two problems at once: shielding blocks outside signals, and absorber material covering the inner surfaces eliminates reflections.
With 5G, frequencies rose and measurement sensitivity increased. We choose absorber material and chamber size according to the frequencies you'll test.
Antenna Design
Antenna gain and pattern measurement.
Device Performance
Phone and modem testing.
Base Station
Base station antenna testing.
Wi-Fi and IoT
Wireless module and smart device testing.
Solutions
Rooms Used in Telecom and 5G
Fully Anechoic Chamber
Reflection-free measurement chamber with absorbers on all surfaces, including the floor.
Standards
Which Standards Do We Build To?
The room is designed to the standard your product or facility must meet and is tested against that standard at handover.
- Your testing and usage needs are defined during the site survey
- A test report is provided at handover
- Annual maintenance and re-testing are available
- 3GPP
Mobile communication (4G, 5G) standards; they also cover wireless performance testing of devices.
- CTIA OTA
Over-the-air (wireless) measurement method for the antenna performance of phones and wireless devices.
Process
From First Meeting to Handover
- 1
Free Site Survey
We listen to your needs, inspect the site and measure the signals in the environment.
- 2
Design and Quote
We define the room size and equipment and give you a firm quote and schedule.
- 3
Manufacturing and Installation
We manufacture the panels, build the room and connect power and ventilation.
- 4
Testing and Handover
We test the room to the standard and deliver it with a report.
Frequently asked questions
Frequently Asked Questions About Telecom and 5G
If your question isn't answered here, ask our engineer directly.
What is the difference between a fully anechoic and a semi-anechoic chamber?
In a fully anechoic chamber all surfaces, including the floor, are covered with absorbers; it is ideal for antenna measurements. In a semi-anechoic chamber the floor is reflective; it is used for EMC testing.
What determines the chamber size?
The lowest frequency to be measured and the device size determine the chamber size. Compact chambers may be enough for small antennas.
Do you also install the measurement system?
We prepare the chamber to suit your measurement system, together with the antenna mast, turntable and cable penetrations.
Can the chamber be adapted to new frequencies?
The chamber's operating range can be extended by changing or adding absorber material.
Telecom and 5G
Free Site Survey for Your Telecom and 5G Project
Tell us briefly what you need; your site survey and quote will be ready within 24 hours.