Test Cell
Cell for component testing.
Shielded High-Voltage Laboratory
We build shielded high-voltage laboratories to accurately measure weak signals such as partial discharge in cable, transformer and insulator testing.
- Low noise for partial discharge measurement
- Grounding and safety planning
- Large-volume structure with special doors
- High voltageTest environment
- Partial dischargeSensitive measurement
- ShieldedLow noise
What is a high-voltage laboratory?
Sensitive Measurement at High Voltage
Partial discharge signals measured in high-voltage tests are very weak. Outside radio signals and mains noise can make these measurements impossible.
A shielded laboratory cuts out outside noise; grounding, safety clearances and doors for large equipment are custom-designed for the project.
Low Noise
Weak signals are measured accurately.
Shielded Volume
Outside signals don't enter the lab.
Safe Design
Grounding and clearances are planned.
Large Doors
Heavy equipment gets in easily.
Options
Let Us Help You Choose Three Options for Your Needs
Laboratory Hall
For transformer and cable testing.
Control Room
Shielded control area for measurement.
Technical specifications
Typical Technical Values
Values are defined per project. We give the exact figures in writing in the quote after the site survey.
Industries where it is used
| Application | Partial discharge, withstand voltage tests |
|---|---|
| Shielding | Per project, focused on low noise |
| Grounding | Dedicated grounding system |
| Door | Large, sliding or folding |
| Reference | IEC 60060, IEC 60270 |
Process
From First Meeting to Handover
- 1
Free Site Survey
We listen to your needs, inspect the site and measure the signals.
- 2
Design and Quote
We define the size and equipment and give you a firm quote.
- 3
Manufacturing and Installation
We manufacture the parts, build the room and connect the services.
- 4
Testing and Handover
We test the room to the standard and deliver it with a report.
Frequently asked questions
Frequently Asked Questions About High-Voltage Laboratories
If your question isn't answered here, ask our engineer directly.
Why is shielding needed?
Partial discharge measurements are very sensitive; outside noise spoils them. Shielding cuts this noise out.
What determines the laboratory size?
Test voltage, equipment size and safety clearances are assessed together.
Can an existing hall be converted?
In most cases, yes. Building height and floor are inspected during the survey.
Do you also do the grounding?
We plan a grounding system compatible with the shielding as part of the project.
High-voltage laboratory
Free Site Survey for Your High-Voltage Laboratory
Tell us briefly what you need; your site survey and quote will be ready within 24 hours.
Related Solutions
RF / EMI Shielded Room
Interference-free room for sensitive measurements.
Shielding Effectiveness Testing
We measure performance and report it.
EMP / HEMP Protected Room
Protects critical systems against pulses.