SAC-3 Test Chamber
3 m semi-anechoic chamber for product testing.
EMC Test Chambers for Electronics Manufacturers
Prepare your products for the EMC tests required for CE and export in your own facility, and pass certification the first time.
- Chamber for EN 55032 and IEC 61000-4-3 tests
- Pre-test chamber close to the production line
- Design suited to your test system, delivered measured
- CE and ExportEN 55032 tests
- Pre-TestPass the first time
- Close to ProductionFast test cycle
Why is it needed?
A Product That Fails Testing Reaches the Market Late.
Every electronic product exported to Europe and many other countries must pass EMC tests for marks such as CE. A product that fails goes back to design, and the launch is delayed.
With your own test chamber you measure frequently during design. You find problems early and go to the certification lab only once.
Depending on your product size, we offer solutions from compact pre-test chambers to semi-anechoic chambers with a 3 m test distance.
Design Validation
Development testing of prototypes.
CE and Export
Full test preparation before certification.
Production Control
Sample testing in series production.
Troubleshooting
Finding and fixing sources of interference.
Solutions
Rooms Used in Electronics Manufacturing
Pre-Compliance Chamber
Quick check room before certification.
Standards
Which Standards Do We Build To?
The room is designed to the standard your product or facility must meet and is tested against that standard at handover.
- Your testing and usage needs are defined during the site survey
- A test report is provided at handover
- Annual maintenance and re-testing are available
- CISPR 32
Emission limits for multimedia products such as computers and audio and video equipment.
- EN 55032
The European equivalent of CISPR 32; the emission tests required for the CE mark.
- IEC 61000-4-3
Immunity testing of devices against outside radio signals.
Process
From First Meeting to Handover
- 1
Free Site Survey
We listen to your needs, inspect the site and measure the signals in the environment.
- 2
Design and Quote
We define the room size and equipment and give you a firm quote and schedule.
- 3
Manufacturing and Installation
We manufacture the panels, build the room and connect power and ventilation.
- 4
Testing and Handover
We test the room to the standard and deliver it with a report.
Frequently asked questions
Frequently Asked Questions About Electronics Manufacturing
If your question isn't answered here, ask our engineer directly.
Should we get a pre-test chamber or a full test chamber?
Your number of products and test frequency decide. If you develop many new products, a 3 m semi-anechoic chamber fits; for fewer tests, a pre-test chamber.
Is a test done in our own chamber valid for certification?
Certification usually requires an accredited laboratory. Your own chamber lets you solve problems beforehand.
Can the chamber be installed in the production area?
Yes. If the floor and space are suitable, installing near the production area shortens test times.
How long does installation take?
Duration depends on chamber type and size. We give a detailed work schedule after the survey.
Electronics Manufacturing
Free Site Survey for Your Electronics Manufacturing Project
Tell us briefly what you need; your site survey and quote will be ready within 24 hours.