EMC for Industrial Equipment: The IEC 61000-6 Generic Standards
The IEC 61000-6 generic standards used for industrial equipment without its own product standard, and the difference between home and industrial settings.
What the EMC Directive asks of manufacturers selling electronics in Europe, summarized as the technical file, declaration of conformity and test steps.
Most electrical and electronic products placed on the market in the European Union and Turkey must carry the CE mark. Several pieces of legislation lie behind this mark, and for electromagnetic compatibility the basic regulation is the EMC Directive 2014/30/EU. In Turkey, this directive is applied through a harmonised regulation.
In this article we explain what the EMC Directive requires, which products fall within its scope, the steps a manufacturer must follow for the CE mark, conformity assessment routes, the importance of the technical file and special cases such as wireless products and fixed installations.
The EMC Directive requires equipment to meet two essential requirements. First, the electromagnetic disturbance the equipment generates must not exceed the level above which radio and telecommunications equipment or other equipment cannot operate as intended. Second, the equipment must have a level of immunity to the electromagnetic disturbance expected in its intended use that allows it to operate without unacceptable degradation of performance.
The directive does not define in detail how these requirements are to be met; instead it refers to harmonised standards. When a product fully meets the harmonised standards published in the Official Journal of the European Union, it is presumed to conform to the essential requirements of the directive. This approach gives manufacturers flexibility in which technical solutions to use, while ensuring that conformity rests on a measurable basis.
The EMC Directive covers almost every type of electrical and electronic equipment that can generate electromagnetic disturbance or be affected by it. A very wide range of products is within scope, from household appliances to computers and from industrial equipment to lighting products. Both devices sold to end users and some components sold for integration into another product can fall within scope.
Some products are out of scope or regulated by other legislation. Radio equipment is assessed under the Radio Equipment Directive, medical devices under medical device legislation and vehicles under vehicle type approval legislation. Simple passive products that by their nature neither generate electromagnetic disturbance nor are affected by it are also out of scope.
The steps a manufacturer must follow for the CE mark follow a set order. The first step is determining the legislation and harmonised standards that apply to the product. The second step is carrying out the product's electromagnetic compatibility assessment; this assessment is usually based on test reports and design analysis. The third step is preparing the technical file.
The manufacturer then issues the EU declaration of conformity stating that the product complies with all relevant legislation and affixes the CE mark to the product. Finally, the necessary information and instructions are provided to the user with the product. In production, it must be ensured that series-produced products have the same characteristics as the product that was assessed.
The EMC Directive offers two conformity assessment routes. The most common is internal production control. On this route the manufacturer carries out or commissions the assessment, prepares the technical file and issues the declaration of conformity. No notified body involvement is needed. When harmonised standards are applied in full, this route is sufficient for most products.
The second route is EU-type examination by a notified body. This route can be chosen at the manufacturer's discretion; it may be preferred where harmonised standards have not been applied or have been applied only in part. The notified body examines the technical file and, if satisfied, issues a type examination certificate. This route provides additional assurance but requires extra cost and time.
The technical file is the body of documents showing that the product conforms to the directive's requirements. It contains a general description of the product, design and manufacturing information, the list of standards applied, the EMC assessment, test reports and, where necessary, a risk assessment. This file must be kept for a set period after the product is placed on the market.
Market surveillance authorities can request the technical file when they want to check a product's conformity. An incomplete or inadequate technical file can be treated as non-conformity even if the product has passed its tests. Keeping the technical file organised, complete and up to date is therefore as important a part of the CE process as testing. We explain how the test plan contributes to the file in our article on the EMC test plan.
Changes made to a CE-marked product require reassessment if they could affect the product's electromagnetic characteristics. Changes to the board layout, use of a new power supply, changes to clock frequencies and changes to housing material or structure are examples. The effect of each change should be assessed and the relevant tests repeated if necessary.
When new versions of harmonised standards are published, the technical file may also need review. When transition periods for standards end, the product's conformity with the current standards must be shown. Manufacturers are therefore advised to follow changes to standards and review their product portfolios regularly. Pre-compliance infrastructure makes it possible to carry out such assessments quickly.
Products containing a radio module are assessed under the Radio Equipment Directive rather than the EMC Directive. RED covers EMC requirements within itself, so the EMC Directive does not apply separately to these products. We explain the requirements for wireless products in detail in our article on RED.
Fixed installations have a special status under the EMC Directive. Large systems permanently installed in a particular location do not carry the CE mark, and no declaration of conformity is issued. Instead the installation must be built according to good engineering practice, this practice documented and the installation instructions of the equipment making up the installation followed. You can find our solutions for electronics manufacturers on our electronics manufacturing page.
Not for most products. When harmonised standards are applied, the internal production control route is sufficient; a notified body is optional or comes in where standards cannot be applied.
Yes. On the internal production control route, where tests are done is not restricted; what matters is the right method and reliable results.
Yes, if the change could affect electromagnetic characteristics. Its effect should be assessed and the relevant tests repeated if necessary.
It must be kept for the period specified in the legislation after the product is placed on the market and be available on request from market surveillance authorities.
No. Products with a radio module are assessed under RED; RED covers EMC requirements within itself.
No. Fixed installations must be built according to good engineering practice, and this practice documented; no CE mark or declaration of conformity is needed.
Related Solutions
Your free site survey and quote will be ready within 24 hours.
The IEC 61000-6 generic standards used for industrial equipment without its own product standard, and the difference between home and industrial settings.
The FCC Part 15 rules electronics sold in the US must follow, the Class A and Class B split, and how it differs from European testing.
Which directive covers products with Wi-Fi, Bluetooth or cellular modules in Europe, and how their EMC testing changes as a result.